PlayStation 3 Slim Laser Unit (Laser and Mechanism) Replacement

Step 1 Laser Unit (Laser and Mechanism)
- Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
Step 2
- Remove Power Supply.
Step 3
- Separate cables, unscrew the screw and remove the Blu Ray drive.
Step 4
- Disassemble the upper metal shield.
- .
- Please SUBSCRIBE to my channel ツ
Step 5
- Remove the two very small phillips screws in each lower corner referenced by the red circles.
Step 6
- Be careful with flex cables.
Step 7
- Now you can remove the Laser Deck.
Step 8
- Transfer two flex cables and 2x rubbers.
Step 9
- You can test the console before full assembling.
- .
- Did you do it successfully?
- Please SUBSCRIBE to my channel ツ

Step 1 Laser Unit (Laser and Mechanism)