Waring Pro SB30 Plastic Sides Replacement

Remove the screws on the back panel with the #1 Phillips screwdriver bit.

• The screws in the rubber legs of the burner do not need to be removed.

• If the back panel has never been opened before, the screws may be more difficult to unscrew.

Using a wrench, remove the bolt from the center of the back panel.

The back panel can now be easily lifted off.

Using a #1 Phillips screwdriver bit or a ratchet wrench with a Phillips screwdriver bit to remove screws located on the interior frame.

• The interior edges of the metal frame are sharp and can cause minor cuts.

Plastic sides should be easily removed after all screws are taken out.