Share
Remove the screws on the back panel with the #1 Phillips screwdriver bit.
The screws in the rubber legs of the burner do not need to be removed.
If the back panel has never been opened before, the screws may be more difficult to unscrew.
Using a wrench, remove the bolt from the center of the back panel.
The back panel can now be easily lifted off.
Remove screws #1 Phillips screwdriver bit.
The interior edges of the metal frame are sharp and can cause minor cuts.
3 screws on the perimeter of the circle
1 screw in the circle
2 screws on the eletrical stands with wires
Remove rod from the center of the plate with a wrench.
Remove plate carefully as to not damage internal components i.e. insulator, metal frame, wires, etc.
WiFi-Direct