Waring Pro SB30 Indicator Lights Replacement

Remove the screws on the back panel with the #1 Phillips screwdriver bit.

• The screws in the rubber legs of the burner do not need to be removed.

• If the back panel has never been opened before, the screws may be more difficult to unscrew.

Using a wrench, remove the bolt from the center of the back panel.

The back panel can now be easily lifted off.

Using two thin screwdrivers (or similar objects) wedge them into the slots of the plastic shell of the desired light.

Push the screwdrivers inward and guide the bulb outwards.

Gently grab by the wires and remove bulb from plastic shell.