Zanussi Washing Machine Fault Code Reset

  • Step 1 Zanussi Washing Machine Fault Code Reset

    • Turn the dial to off.

    • Press and hold together the start button (the one with the green arrow) and the button to the left of it.

    • While holding, turn the Programme Dial 1 'click' clockwise(to 90 degrees temp).

    • The lights ( or digital screen ) will flash - release the buttons (the lights should scroll).

    • Now turn the dial a further 9 clicks clockwise.

      • Note the error code displayed.

    • Continue turning the dial clockwise till you get to off, then turn to any program and back to off.

    It shows me error E72 what i have to do?

    I dont have digital display after doing this my start/pause button & my end button are flashing & bleeping continously

    Im only getting 5 green flashes no red

  • Step 2

    • All washing machines will eventually stop working. First try the brushes on the main motor. They wear down, the more work the quicker it will happen. They are usually contained in an external plastic housing, one each at the rear end of the motor and easy to replace.

    Tried this but still not working

    I had to do it a couple of times before it worked. Try again.

    Hi. We get E21. Cleaned the filter and still no joy. Any ideas?